You can attach the loop of the strap in the bottom left corner of the phone. (you need to open up the back cover first). Enjoy
There should be a hole to do it, on the hinge. You can see the example in this picture http://www.telefon.de/images/big/motorola_razr_v3i_dolce_gabbana.gif
Length of wrist strap/Band circumference = 7 inches.
If you remove the battery you will see inside the phone next to the lanyard slot an extra piece of plastic not seen on the opposite side. Push your lanyard/charm through the slot and hook it over the extra peice of plastic. Simple! ( Had to use a magnifying glass to see it!)
resistors
There is a strap which you wrap around your wrist and a wire with a clip on the end. Attach the clip to the chassis of the computer to eliminate static electric discharge. Any difference in voltage between the chassis and you will flow through the wire and be neutralized.
The strap of his wrist watch became loose.
All wii remotes come with the wrist strap.
You take the wrist strap and look at both ends. One end should have a tinier strap attached to it. You take the tiny strap and look at the back end of the ds. It should have two small holes there. Then take the strap and stick it in one hole. then , push the strap, and it should come out the other hole. Take the strap that came out the hole, and make a loop, by splitting them apart. Slip the actual wrist strap through the loop, and pull it through. Bingo!
The wrist strap in the PSP Accessory Pak by Mad Catz is able to be adjusted a little bit.
the wrist strap will prevent computer components from being damaged by static electricity.
Wrist
a watch worn on a strap around the wrist.