answersLogoWhite

0

Hi.. backwashing is pretty easy. you didn't mention if you have an inground or above ground or what type filter you use.. but, it's all basically the same thing. First, turn the pump off, then, set the backwash lever to open. Turn on the pump. Let it backwash the water for one minute. Turn the pump off and close the backwash lever. Turn on the pump and run for 20 seconds. Turn off the pump, open the lever again, backwash, turn off and then repeat the 20 second run cycle. Three full cycles like this will usually do the trick.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

When vacuming pool set at waste or backwash?

If the pool is really dirty then it is best to set the filter to waste.


What quantity of water is wasted during a swimming pool filter backwash?

29 gallons


Your swimming pool in filter position but is still aloowing water to backwash from pool?

You may have to check the seals in the multyport on top of the sand filter.


What kind of in-ground swimming pool maintenance is needed over winter in cold climates?

To winterize your inground swimming pool, first backwash the filter, and then disconnect the pump. Purchase winterizing chemicals for the pool water, and be sure to use a pool cover.


Which valve lowers swimming pool pressure?

You can not measure the pressure in a swimming pool. If you mean the pressure on the filter tank gage then you may have to backwash the filter. Talk to your local pool store for instructions as how to maintain a swimming pool and the equipment. Get some education on swimming pool maint. before you get into some real trouble. A pool is not too forgiving for someone without a basic knowledge of pools.


How do you calculate the required pool filter backwash rate in gallons per minute and backwash volume in gallons?

how do i calculate the volumn of backwash in a pool


Why is your pool draining when the pumps are on?

Your sand filter multihead is either in the backwash, rinse, or waste position. Move it to the filtration position.


Do you shock a pool or backwash pool first?

Backwash first then shock. If you shock and then backwash you will be throwing away the shock you just put.


how to drain water from pool?

Just backwash until it is at the level you would like it to be. Or get a floating swimming pool skimmer ond take advantage of the free water and save on pool salt if you have a saltwater chlorinator.


What happens to the salt added to a saltwater swimming pool?

It just stays there. some is lost to the backwash , splashing, overflow and so on but the salt that is in the water stays there.


Swimming pool water is up to the brim with rain. Could it be something's not working properly?

No it is working as one would normally expect. swimming pools don't normally have an over flow fitted so the pool just keeps filling up past the static skimmer. the only way to fix it is just to backwash the filter until it is at the right level again. or if you don't want to waste the water get a floating pool skimmer.


Should a pool be backwashed twice a day?

No absolutely not unless you want to waste a lot of water you backwash a pool when the pressure in front of the filter becomes too high or goes into the red.