answersLogoWhite

0

Just backwash until it is at the level you would like it to be. Or get a floating swimming pool skimmer ond take advantage of the free water and save on pool salt if you have a saltwater chlorinator.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Can you change a above ground pool center drain with water in it?

Where is the drain located? If it is on the wall near the top then you can keep the water in the pool. If it is near the bottom then you may have to drain the pool.


A pool can be filled with water in 10 hours Draining the pool requires 20 hours If the pool is empty and the drain is open how much time will be needed to fill the pool?

Trick question. The pool is empty but the drain is open. With an open drain, the pool will never fill, unless the water entering exceeds the water draining.True,-----------> 20 hours


How can I efficiently drain water from my pool?

To efficiently drain water from your pool, you can use a submersible pump or a siphon hose. Make sure to follow the manufacturer's instructions and local regulations when draining water from your pool.


How do you remove some water from your pool?

drain it


Pool floor drain is plugged?

If this a newly built pool then have the company that built the pool ~ or the plasterer ~come back out and finish their job of prepping the pool before the start up. Whatever it takes to clear the main drain of the cement is their job and they have shirked their responsibility. If they say they have to drain the pool this then that will be at their expense. There should be no charge for this task and they should also pay for the water to refill the pool. k


How to drain your pool properly and safely?

To drain your pool properly and safely, follow these steps: Turn off the pool pump and filter system. Use a submersible pump to slowly drain the water, avoiding damage to the pool structure. Monitor the water level to prevent the pool from emptying completely. Dispose of the drained water properly, following local regulations. Refill the pool with fresh water and balance the chemicals as needed.


Where should I drain the pool water?

It is recommended to drain pool water into a sanitary sewer system or a designated drainage area to prevent contamination of the environment. Be sure to check local regulations and guidelines before draining the pool water.


Is it wrong to drain your plaster pool when the temperature is above 100?

Why would you drain your pool just becasue the water is hot? Never drain your inground pool unless you have first cut holes in the bottom of the pool to keep it from floating. If the water table in your area is high enough, your inground pool could "float" out of the ground, effectively ruining your pool.


How to drain pool water properly and efficiently?

To drain a pool properly and efficiently, locate the drain valve at the bottom of the pool and attach a hose to it. Make sure the hose is long enough to reach a safe drainage area. Open the valve and let the water drain slowly to avoid damaging the pool structure. Monitor the water level and adjust the flow as needed. Once the pool is drained, close the valve and remove the hose.


If water is dark and murky must you drain the pool to fix it?

no


When is the best time to drain your pool in Arizona?

In Arizona, it is best to drain your pool in the Winter. You might be wondering, why shouldn't I drain my Arizona pool in the summer?The answer to that is that if you drain your pool during the hot, dry Arizona summer months, you risk causing expensive damage to your swimming pool. The floor of the pool can crack due to the heat and lack of moisture. Draining your Arizona pool in the summer is also bad for the desert environment where water is scarce. The pool water that is drained out will mostly evaporate instead of being used to water the lawn or other plants on the property.


How can I use a pump to efficiently drain water from my pool?

To efficiently drain water from your pool using a pump, follow these steps: Connect a hose to the pump's outlet and place the other end of the hose where you want the water to drain. Submerge the pump in the pool and turn it on. Make sure the pump is set to the appropriate setting for draining water. Monitor the water level in the pool and adjust the pump as needed to drain the desired amount of water. Turn off the pump once the water has been drained to the desired level.