don't tighten the rad cap all the way, only to the first natch so it is secure but moves like it is loose, will allow air to excape or just normally run the engine as you normally would to heat it up and it will bleed its self
Your ''KIA'' dealer,or eBay
how to bleed 2002 saturn vue 3.0
It should have a bleeder screw on top of the thermostat housing.
Removal of the cooling fan on a 2002 GMC Sonoma 4.3l begins with disconnecting the battery, removing the wiring harness to the fan, and taking off the protective shroud. The fan can then be unbolted from the frame and removed.
Coolant Temperature Sensor/Switch (For Computer)Locations View
Per the 2002 Bonneville Manual the cooling system holds 10 quarts.
There is a rubber hose beside the master cylinder, with a round fittin in the end of it. take a straight bit screw driver, with engine running,loosen and let it bleed the air out . re tighten.
My data give 7.00Ltrs as the cooling system capacity.
The thermstat is on the bottom hose. The flow of water is opposite of most other cars. Don't forget to bleed the cooling system when you fill it back up.
wiring wire harness cooling sistems ford focus 2002
FYI - Auto Recall: 2002 KIA Sportage - Engine and Engine Cooling: Cooling System: Fan. Dealers will replace engine cooling fan with a fan made of improved material - recall began on June 11, 2007.
If This Is To Remove Air From Fuel Lines. Forget It. You Do Not Have To Bleed The Fuel Line.