Ensure that the engine is cold so that no back pressure is in the system. Remove the radiator cap and then locate the butterfly valve which is under the radiator. Place a pan under the radiator and open the valve. When the radiator is drained, close the valve and pour in fresh antifreeze, then recap. These are generic instructions which apply to pretty well any vehicle.
how to bleed air out of cooling system 1997honda civic ex
try bleeding the master cyl.
how do you bleed a diesel peugeot cooling system
the library should have a shop manual for this vehicle, you can make copies of the right sections :)
There is no reason to ever bleed a cooling system.
Any time you flush out the cooling system you need to bleed the cooling system.
How do you bleed the cooling system of a 1988 acura legend? Is there a bleeding screw and where is it located?
If the cooling system is in good working order the system will bleed the air out itself. If the system has a leak anywhere no matter how small the system will never bleed the air out.
there should be a air valve on the engine that you can bleed the bubbles out of the cooling system.
Doesn't have any. The system should self bleed.
you go to a mechanic, because this is probably the best advice you will get on the web.
Did you bleed the air valve? if you open any part of the cooling system on a dodge intrepid, ie: change the radiator hose or thermostat housing. You need to bleed the air out the Valve. If not the car will over heat.