Want this question answered?
You're simply going to have to have it removed and replace it. That nipple is at the lowest point in the system and there is no other way to drain it unless you have the system power flushed.
With an Easy-Out.
how do I bleed my power steering pete thank you
turn steering wheel lock to lock several times.
1.Fill up resivoir in boot 2.Start car 3.Engage first gear and maintain 2500 revs wheels turning 4.Slowly turn steering right while cracking off left bleed nipple on the diff until full lock is made and lock off bleed nipple. 5.Now slowly turn steering to left while crackin off right bleed nipple until full lock is made and lock off bleed nipple 6.Make sure resivoir level ok 7.Repeat 4,5,6 3 or 4 times (The AYC lamp will come on in car while bleeding) 8.Lock off the nipples check for leaks
Yes, This is part of hydraulic system
back bleed is always the best. Use a oil can wth pipe on the end to the bleed nipple. Open nipple and pump like mad until fluid is at its level on master cylinder
turn the steering wheel lock to lock several times it bleeds itself when it is running
cut up the sable and make it run
ask your doctor
It doesn't have a bleed valve for the power steering.
You don't bleed power steering fluid. Raise the front of the car, start the engine, turn the steering wheel lock-to-lock 3 times to get the air out of the system. Make sure to use axle stands and block the wheels so you can do this safely.