Want this question answered?
You do not treat pool water hardness with chemicals. If you have hard water in your area then you need to know what the allowable maximum of water hardness is before the water needs to be changed. You remove or reduce the hardness in water by draining and refilling the pool. K
You can, if the water presently in the pool is 'hard' - but be very careful to keep an eye on the Calcium Hardness of the pool water. If you filled a pool with water from the softener, the water would be hungry for calcium and drag it out of the pool walls, making them feel and look like sandpaper. Calcium hardness should be kept within 200-275ppm. best to use regular water for topup and keep the pool water properly balanced (see your local pool store).
You don't put chemicals in a pool, if someone threw up in a pool, wouldn't someone clean the pool? I mean seriously.
He originally came up with the scale when classifying a private collection. He classified them by their physical characteristics rather than their chemical composition, using their relative hardness.
no one likes your Hardness! hardness is not a good character.
Hardness increaser from your pool supply company
If the calcium is a result of pool chemicals, draining some or all of the pool water will lower the calcium hardness level. If the cause is the fill water, commercial hardness reducers or chelating agents will bond with the calcium to keep it trapped in solution.
You do not treat pool water hardness with chemicals. If you have hard water in your area then you need to know what the allowable maximum of water hardness is before the water needs to be changed. You remove or reduce the hardness in water by draining and refilling the pool. K
The only way to remove Hardness is to partially drain and refill your pool.
Calcium chloride increases the hardness of water. Proper hardness is critical to balancing the water in a pool. Proper hardness is especially important in a plaster pool to prevent leaching of the plaster finish, which results in a rough surface. Calcium chloride can be purchased at home improvement stores at significant savings over pool supply outlets.
Your incoming fill water may be hard.
Probably the least expensive is to replace some or all of the water(dependind on hardness) with fresh.
Low Calcium Hardness in pool water means that there is low calcium in the water and is considered "soft" and soft water tends to be corrosive. It will etch away and your plaster and any metal object the pool water touches.
sodium thiosulfate
Bring a friend and have fun and if you don't wanna bring a friend just swim lengths of the pool.
The hardness of berkelium was not determined up today.
a pool full of water that will only bring you up around and around with no exiting.these type of things usually are at water parks.