Find the sensor... Usually there are 3 wires running into the sensor. 1 HOT, 1 GROUND, and 1 return wire.
Just short the GROUND and the RETURN wire together with a splice.
pass. side rear
Bank 1 = Cylinder 1/Drivers Side Bank 1 Sensor 1 = Upstream (before cat) Drivers Side Bank 1 Sensor 2 = Downstream (after cat) Drivers Side Bank 2 Sensor 1 = Upstream (before cat) Pass Side Bank 2 Sensor 2 = Downstream (after cat) Pass Side
Bank 2 is pass side. Sensor one is pre cat, sensor two is post cat.
yes bank one on pass side
Bank 1 is the pass side.
bank 1 is on the pass side bank is on driver side
After cat, pass side
It's under the seat and bolted to the rear fender.
Oxygen sensor bank 2 (pass side) sensor 2 ( after cat) circuit
the cam angle sensor is the crank angle sensor it preforms both jobs
It is a two wire sensor on the front pass side of the intake manifold. It is the one that is up high on the manifold and sits at an angle.It is a two wire sensor on the front pass side of the intake manifold. It is the one that is up high on the manifold and sits at an angle.
Left Side By Alt, Or Pass side Standing in front of TopOf Engine!!!! MPS AUTO!!!!!