First take the dash apart so you can get at the ignition,remove the screws and take the ignition out you will see 3 small wires 2 black and 1 yellow,start the car and cut the yellow wire ,but make sure the car is started,then just tape the wires so they don't touch each other.Then put your car back together and you should not have anymore trouble with your anti-theft system.It worked for me.
Well it goes 2 ways. if yo are a thief i not tellin yo...
where is the wire for theft system 2000 ford ranger to bypass
you dont, its incorporated in system.
How do you bypass the alarm on a 2000 Ford ranger cause I replaced the ignition
p0412 on a 2000 Malibu is secondary air injection system valve A malfunction-
How do you disable anti theft system on a 2000 Ford ranger
no the egr valve has a big effect on the engine,it is controlled by the pcm.
Under the hood, remove the fuse cover and take no.11 curcuit breaker should be icc enable engine should start
my car is locked and the anti theft system is on, how can I deactivate that system
where is the anti theft located on a 2000 mercury cougar
Enable Anti Theft in Ford Taurus 2000 SE
I have a 2000 Malibu and it also had a faulty anti-theft system and the car would not start if it was flashing. So, we turn the ignition forward until all the gauges and lights come on but not starting the car and leave in this position for 10 mins. (it will stop flashing) then turn the key all the way off, then start the car in one swift motion. .........I hope this helps