You can bypass the AC low pressure switch, on your Toyota Corolla, by removing the switch. You can remove the wiring to the switch and leave the switch and place.
Where is the fuel pump relay switch located on a 1994 Toyota pickup
The 1986 Toyota pickup flasher relay switch is located beneath the dashboard on the drivers side of the passenger compartment. The flasher relay switch will be labeled as such.
inside the tranny
The 1984 Toyota pickup truck headlight relay switch can be found in the fuse box. The headlight relay switch will be at the top of the third column.
to switch to electric
Begin by removing the retaining ring at the top of your 1986 Toyota pickup truck ignition switch. The ignition switch will slide out. Remove the wiring harness from the back of the ignition switch.
The inertia switch, on your 1995 Toyota Tacoma pickup truck, can be found on the firewall in the engine compartment. The switch will be located on the drivers side of the firewall.
Behind the drivers side kick panel.
if your converting your truck to manual/stick transmission youll have to join the 2 wires that connect to the neutral switch uaually found at the bottom of the t-bar theyll be the same color (simply cut and solder/join wires together)
just unplug the connector going to the switch that is mounted on top of your brake pedal and hook up a jumper wire to jump the 2 terminals (on the connector side not on the switch side) this will allow you to start the truck without pushing in the clutch and without pushing the clutch start cancel button.
Inside the evap housing, on the line to the expansion valve.