if we know resistivity of copper i.e is very small (1.68×10−8)
transposing the definition to make resistance the subject (Pouillet's law):
R is the electrical resistance of a uniform specimen of the material (measured in ohms, Ω) is the length of the piece of material (measured in metres, m)A is the cross-sectional area of the specimen (measured in square metres, m²).
You go to the NEC and look at the chart for developed length and the ambient temperature and the load factor and if it solid or stranded wire as stranded allows for more voltage
If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?
Generally a larger diameter copper wire would create the least resistance to electron flow. Copper is the most conductive and is widely used.
increases
The main difference is in the price. Oxygen-free copper is sold to people with plenty of money for loudspeaker wire, but provided the wire has less resistance than one tenth of the speaker resistance (usually 4 or 8 ohms), the resistance of the wire is immaterial, and ordinary copper wire is perfectly all right. Highly refined copper has about 1% better conductivity than the usual variety. That difference in conductivity is insignificant for audio use and is also produced by a 3 degree C temperature rise in copper.
Aluminium wire has high resistance than Copper.
You go to the NEC and look at the chart for developed length and the ambient temperature and the load factor and if it solid or stranded wire as stranded allows for more voltage
Copper wire. .wikipedia.org/wiki/Electrical_resistivity_and_conductivity
For a single temperature, yes. The copper wire will have a much smaller cross-section than the iron wire. For multiple temperatures, no. Copper and iron have different temperature coefficients for resistivity.
How do you calculate Resistance of 70mm2 single core wire?Read more: How_do_you_calculate_resistence_of_70mm2_single_core_wire
If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?
No. Other things being equal, a long wire has more resistance than a short wire.
(rho) or resistivity of a "wire" is calculated using this formule:rho = Resistance x Area / length of materialthe resistivity of copper is 1.7 x 10 -8 ohm/mResistivity is measured in ohm metres, NOT ohms per metre!
As the question is some what blind: However if the cross sectional area of the copper wire/rod is uniform, then we can find the length is we know the electrical residence between two ends. That is the concept of specific resistance is entering into picture to calculate the resistance then the length.
Nichrome wire has such high resistance that it is used to convert electrical energy into heat. Many heating elements are made from nichrome. Copper wire has the best conductivity, for the price, of any metal.
Copper wire has low resistance, so it is unable to produce enough heat to glow.
The resulting resistance of the parallel combination will be the resistance of the original wire divided by n squared.