3* 4* the liquid you have
K=(voltmeter range*ammeter range*power factor)/wattmeter range
Look for the ct (current transformer). You will find a ratio rating (for example, 200:5.) This means divide 200 by 5. The result is 40. Any difference in reading from a certain time should be multiplied by 40 to get actual energy consumption. This is the basic information, but in practice it should be calibrated by a government-certified body (the department of energy, for example) to perfectly match the kwhr-meter revolution.
yes ,Q factor is ratio of energy stored to energy dissipated
The Q factor of a coil, sometimes called the unloaded Q factor, is the ratio of the energy stored in the coil to the energy dissipated in the resistance of the wire.
Power Factor = KVA/KW. This has no unit. Its value is always 1 or less.
The way to calculate standard time is simple. Standard time is calculated by taking observed time multiplying it by rating factor and then multiplying it by PFD (Personal, Fatigue, and Delay Allowance).
If you divide by seven instead of multiplying by seven, you are off by a factor of 49. Example, to calculate the percentage: 100 x 7 = 700, 100 / 7 = 14.29. The percentage error is about 98%.
A conversion factor is the same as multiplying by a factor of?
When a shape is enlarged the multiplying factor is greater than 1. Example : A factor of 7 means that a length of 1cm on the original shape would be represented by a length of 7cm on the enlarged shape.
4
It is a number, usually multiple of 10, that we have to multiply the reading of the measurement with, in order to have the true number. So if the reading is 1,23456 and the multiplying factor is 100, then the true number is 123,456.
It works by multiplying and diving for example: a factor of 10 would be 1,2,5 and the number itself 10
The numbers you get from multiplying by a number is called a product.I believe it's like this: factor x factor = productFor example 5x5=25. The two 5's are factors and the 25 is the product.
what multiplying factor decrease a number by 3 %
K=(voltmeter range*ammeter range*power factor)/wattmeter range
You calculate the scale factor if you do have a scale is by dividing if it is a small shape to a large shape and multiplying if it is a large shape to a small shape example: shape 1 sqaure shape 2 square equation 2 10 10/2=5 shape 2 square shape 2 square equation 10 2 2/10
cross product method is multiplying the numerator of the first factor to the denominator of the second factor and multiplying the denominator to the numerator of the second factor.