yes ,Q factor is ratio of energy stored to energy dissipated
The Q factor of a coil, sometimes called the unloaded Q factor, is the ratio of the energy stored in the coil to the energy dissipated in the resistance of the wire.
Power factor is:the ratio of true power to apparent powerthe ratio of resistance to impedancethe ratio of the voltage across a circuit's resistive component to the supply voltagethe cosine of the phase angleetc.
Ratio of voltage rating and current rating is called power factor in electricalAnswerPower factor can be defined in a number of ways -for example:cosine of the phase angleratio of true power to apparent powerIt has nothing to do with the ratio of voltage rating to current rating!
K=(voltmeter range*ammeter range*power factor)/wattmeter range
ratio between true power and apparent power is called the power factor for a circuit Power factor =true power/apparent power also we conclude PF=power dissipated / actual power in pure resistive circuit if total resistance is made zero power factor will be zero
The Q factor of a coil, sometimes called the unloaded Q factor, is the ratio of the energy stored in the coil to the energy dissipated in the resistance of the wire.
The quality factor (Q factor) of a damped oscillation is a measure of how "good" or efficient the oscillation is in terms of energy loss. It represents the ratio of the energy stored in the oscillator to the energy dissipated per cycle. A higher Q factor indicates lower energy loss and a more efficient oscillation.
The vacuum frequency is the natural frequency of an oscillator in a vacuum, which is given by f = 1/(2π√LC), where L is the inductance and C is the capacitance. The Q-factor in vacuum, Qvac, represents the quality factor of the oscillator in a vacuum, indicating the ratio of energy stored to energy dissipated per cycle.
No, the ratio of an object's mass to its volume is called density. Potential energy refers to the energy stored within an object due to its position or condition, such as gravitational potential energy.
Energy efficiency refers to the ratio of useful energy output to the total energy input in a system. The human body is approximately 25% energy efficient, with the remaining 75% of energy being dissipated as heat. This efficiency can vary depending on factors such as metabolic rate and activity level.
The ratio of kinetic energy to potential energy is variable, as it depends on the specific situation. In general, kinetic energy represents the energy of motion, while potential energy represents stored energy due to an object's position or state. The ratio of kinetic to potential energy can provide valuable insights into the dynamics of a system.
A conversion factor is a ratio equivalent to one.
the ratio of amount of energy generated during specified period to the energy could have been generated during that period by any palnt is the capacity utilisation factor.
A scale factor is the ratio of corresponding linear measures of two objects.A scale factor is the ratio of corresponding linear measures of two objects.A scale factor is the ratio of corresponding linear measures of two objects.A scale factor is the ratio of corresponding linear measures of two objects.
Find a common factor of the number in the ratio. If the common factor is 1, then the ratio cannot be reduced. Otherwise, divide both numbers of the ratio by the common factor. It will have been reduced.
A ratio always has a common factor, even if it's only 1.
To divide the numerator and the denominator of a ratio by the same factor means to simplify or reduce the ratio. This is done by dividing both numbers in the ratio by their greatest common factor, which results in an equivalent ratio.