0
How do you calculate the fuse rating level if the full load is 4 amp?
Wiki User
∙ 14y ago
A fuse rating is normally the 120% of the rated full load current. So, 4 amps times 120% is (4x120%) = 4.8amps
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the fuse rating of 600watt appliance on a 220 volt supply?
The fuse rating should be 5 amps
What is the fuse rating for a kettle?
A standard 3kW immersion heater will require a fuse rating of 13 A. This is because, it draws a current of 12 A.
Low volt fuse to high volt fuse?
I'm not sure of your question here. If you are asking if you can replace a fuse with a fuse with a higher voltage rating, the answer is yes, but it probably won't fit in the same terminals. The voltage rating must be the same or higher than the voltage applied.
How many volts in 30amps?
All fuses have a voltage rating, which is independent of its current rating. The current rating is the maximum current the fuse will pass; any higher, and it will blow. The voltage rating is the maximum voltage that is allowed to appear across the fuse should it blow. If the voltage is any higher than the fuse manufacturer's rating, it may arc across inside the fuse, causing power to continue to be supplied to the faulty item that caused the fuse to blow in the first place. This is obviously very dangerous, and could result in severe electric shock, or fires. The voltage rating is usually stamped on one end of the fuse.
What us the rating of the fuse which is most Commondly fitted to three pin plugs?
If you are referring to the standard plug used in the UK, then the maximum rating fuse is 13 A, which can supply a load of approximately 3 kW. But the fuse fitted must match the power-rating of the load, so lower-rated fuses are available; for example, a 3-A fuse can supply up to about 700 W.
What is the correct formula to calculate a fuse rating?
watts Divided by Volts = amps
A transformer is rated at 12V-0-12V and 250mA so what does the 250mA mean and how do you calculate the fuse for the primary winding without knowing the VA rating?
A: The VA rating is there 6v/a the power fuse to blow is 6watts. 050a fuse
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
What is the fuse rating of 600watt appliance on a 220 volt supply?
The fuse rating should be 5 amps
What is the current rating of T2L 250v fuse?
The current rating is 2A (2 amps).
What happens if you use a fuse that's overrated for voltage but has the correct current rating?
Using a fuse correctly rated for current but "overrated" for voltage does not present a problem. Current ratings are critical safety issues, and fuses should be replaced with those of the same current rating. But using a fuse with an identical current rating but a higher voltage rating is not a problem. The reason for that lies in what the voltage rating of a fuse is. Fuses are given a voltage rating to state a maximum voltage in a circuit that they are designed to protect. And the voltage rating has nothing to do with the "normal" operation of the fuse. The fuse carries current when it operates normally, but when something happens and excessive current flows, the fusible link heats up and opens. This is where the voltage rating comes into play. It is possible that a fuse can arc through when it fails. It is the voltage rating that stands in the way of this. As long as the voltage rating of a circuit is not beyond the voltage rating of the fuse, that fuse will fail safely when it fails. It is acceptable to use a fuse of an equal current rating but a higher voltage rating when replacing a fuse that has failed.
What is meant by ratting of fuse?
A fuse is given a various rating (strength). For instance, a home appliance (washing machine, etc) would usually have a fuse with a 13 amp rating. While a low powered lamp would only merit a 2 or 5 amp fuse rating. It is important to use a fuse of the correct rating in amps for each electrical appliance.
How is the minimum fusing current related to the current rating of a fuse?
Each fuse has its own rating. It will be marked on the fuse somewhere.
What is the maximum current that can flow through a fuse?
A current rating of a fuse is designed to open a circuit at a specific current flow. This rating is imprinted on the fuse and lets you know what the maximum amount of current the fuse is designed to open at. A fuse is in the circuit to protect the conductor that the current flows through. Never over fuse a conductor's current carrying capacity.
What is the fuse rating for a kettle?
A standard 3kW immersion heater will require a fuse rating of 13 A. This is because, it draws a current of 12 A.
How fuses are rated?
Fuses are rated by amperage (current) and voltage. The larger the current need, the larger the rating of the fuse, to handle the current. The voltage rating of a fuse defines the maximum value of circuit voltage in which the fuse can be safely used. A fuse should not be used in a circuit with a voltage exceeding the voltage rating of the fuse.
What is a fuse rating?
Fuses have two basic ratings. The first is current rating. The current rating is the amount of current that a fuse will safely pass before blowing. When the current flow through a fuse exceeds its rating, it opens up and breaks the circuit. If a fuse has a 5 A rating, it will open as current flow through it exceeds 5 amps. It is useful to note that there are some fuses that are designated as time delay. These fuses will sustain current in excess to their current rating for a short period before blowing. The fuse that blows immediately when its rated current is exceeded is an instantaneous fuse. The other way fuses are rated is by voltage. So when selecting a fuse, be sure that both the current and voltage rating are suitable for the application.Fuse rating is the permissible minimal current to pass in the fuse element,without causing the fuse to blow or melt.
