0
Is this a commercial Pool?
If yes then what state is the pool located in? Different states, different codes.
Some methods are: based on water volume, surface area, flow rate. Some have a combination of these methods or others.
Please provide the state and I may be able to provide the method used.
yes, California
A: Check with you local department of Health for the most accurate answer. k
Model Code Note - The 2006 ICC International Building Code lists the maximum area allowance per occupant as 50 gross SF per person for the pool itself, and 15 gross SF per person for the deck area.
Similarly, the 2009 NFPA 101 Life Safety Code uses factors of 50 and 30 SF/P. Plus you have to consider the load limits of the approved means of egress from the room (if it's indoors).
What else can I help you with?
How do calculate swimming pool heat cool pump load?
not a valid question
Calculate occupant load of pool for a clubhouse in Virginia?
If this pool is indoors consult your local fire marshal for the restrictions on the building occupancy level
How do you calculate the occupant load in a pool for Arizona?
By the number of suface area square feet. Check with the local Building Dept. for specs.
How do you calculate line regulations?
no load voltage - full load voltage by full load voltage
How do you calculate working load limit?
There are several ways to calculate working load limit. One of these includes Minimum Breaking Load (MBL) divided by Working Load Limit (WLL) equals Working Load Limit (WLL).
How do you calculate a dependency load?
lolz
How do you calculate load of a house?
You mean heat load? Use Manual J.
How do you calculate dg current?
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
How do you calculate the required pool filter backwash rate in gallons per minute and backwash volume in gallons?
how do i calculate the volumn of backwash in a pool
How do you calculate safe working load of a bollard?
To calculate the safe working load of a ship's bollard, you need the working stress and the force applied. These two will help you compute the safe working load.
How do you calculate stress due to dynamic load?
stress is the ratio between the load and area
How do you calculate DG set current?
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
