Want this question answered?
It depends on how many amperes there are. If you have 1 amperes, then you get 260 watts. If you have 260 amperes, then you have 67,600 watts. If you have 0.001 amperes, then you have 0.26 watts. Its just watts = volts times amperes. Of course, the limiting factor is the available power behind the 260 volts, but you did not say anything about that.
Watts = volts x amperes. So if your region uses 110 volts, 20 amperes is equivalent to 2200 watts; if your region uses 220 volts, 20 amperes is equivalent to 4400 watts.
Amps = Watts/Volts, or Amps = Sq Root of Watts/Resistance.
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
144 watts <<>> The formula to find watts is W = A x V. Watts =Amps x Volts.
It depends on how many amperes there are. If you have 1 amperes, then you get 260 watts. If you have 260 amperes, then you have 67,600 watts. If you have 0.001 amperes, then you have 0.26 watts. Its just watts = volts times amperes. Of course, the limiting factor is the available power behind the 260 volts, but you did not say anything about that.
Amperes measure the rate of flow of electricity in a conductor Volts measure electrical pressure Watts measure the amount of energy or work that can be done by Amperes and Volts Relationship: Work = Pressure x Flow or Watts = Volts x Amperes When you know two variables you can calculate the other Formulas - This formula referred to as the West Virginia Formula (W - VA)Watts = Volts x Amps Volts = Watts / Amps Amps - Watts / Volts Refer to link below for more information
The normal calculations for watts are as follows.amps x volts = wattsvolts2 / ohms = wattsamps2 x ohms = wattsScroll down to the Related links and look at "Watts, Volts, Amperes, and Ohms".
Watts = volts x amperes. So if your region uses 110 volts, 20 amperes is equivalent to 2200 watts; if your region uses 220 volts, 20 amperes is equivalent to 4400 watts.
Volts X amperes = watts.
The relationship between amperes, volts, and watts is... watts = amperes * volts Confirming by looking at the fundamental units involved... watts (joules per second) = amperes (coulombs per second) * volts (joules per coulomb)
The relationship between amperes, volts, and watts is... watts = amperes * volts Confirming by looking at the fundamental units involved... watts (joules per second) = amperes (coulombs per second) * volts (joules per coulomb)
Power=Volts x Amps Unit for power is watts
Amps = Watts/Volts, or Amps = Sq Root of Watts/Resistance.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
I would assume you are speaking of AC circuits, and do not wish a long winded engineering primer. The basic formulas to calculate all: A=Amperes V=Volts W=Watts AxV=W , W/V=A, W/A=V So, to find Amps, divide voltage into the wattage A = W/V