In order to Calculate the weight of a hollow cylinder, you need to find out the density of the material of the cylinder first. once you have that, you can use the formulas below
Find out volume of material as follows:
Volume = Pi * (Outer Diameter of Cylinder)2/4 - Pi * (Inner Diameter of Cylinder)2/4
Mass = Density * Volume( from above equation)
Note: Remember that units of Density and volume should be matching.
mass of cylinder (o.d.) minus mass of cylinder (i.d.)
Find every thing
weight of ms hollow bar 20mm*20mm
The cylinder will support, at neutral buoyancy, as much weight as the weight of water it could contain, less the weight of the cylinder itself.
a tube is a hollow cylinder , a cylinder can be hollow or solid - according to my Websters dictionary
If you are going to weigh a liquid in a graduated cylinder, the weight that you will get when you place the cylinder on the scale will be the combined weight of the cylinder and its contents. To find the weight of the contents alone, you therefore have to subtract the weight of the empty cylinder. And to calculate density you need to know both the weight and the volume.
If you are going to weigh a liquid in a graduated cylinder, the weight that you will get when you place the cylinder on the scale will be the combined weight of the cylinder and its contents. To find the weight of the contents alone, you therefore have to subtract the weight of the empty cylinder. And to calculate density you need to know both the weight and the volume.
Divide the volume by the hieght. The result is the area of the circle forming the cylinder. Divide the area of the circle by PI. Multiply by 4 and then take the square-root. This will be the diameter of cylinder.
you subtract the weight of the water from the weight of the measuring cylinder and you get the volume of the stone
A hollow cylinder.
You cannot. The mass depends on the material of the shaft and that has not been specified.
The easiest way is to place the graduated cylinder on a scale or balance and measure the weight. You would then calculate from the weight (a force measured in kg, usually) to determine the mass.