answersLogoWhite

0

With your hands

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How quarts of oil does a 91 Oldsmobile custom cruiser with a 305 takes?

5 quarts with oil/filter change.


Does the 1987 Oldsmobile custom cruiser have anti lock brakes?

No


Where is the fuel reset button on my 91 custom cruiser Oldsmobile?

A 1991 Oldsmobile does not have a reset button.


Where is the fuel filter located on a 1988 Oldsmobile custom cruiser?

on the front of the carburetor


How do you replace the thermostat located on a Oldsmobile Custom Cruiser?

remove old thermostat and replace with new thermostat and gasket


Where is the voltage regulator on a 1991 Oldsmobile custom cruiser wagon?

The voltage regulator is an integral part of the alternator on that vehicle.


What is the weight of a 1984 Oldsmobile custom cruiser?

The weight of a 1984 Oldsmobile Custom Cruiser typically ranges from approximately 3,800 to 4,200 pounds, depending on the specific configuration and options. This full-size station wagon was designed to accommodate families and their belongings, contributing to its heavier weight compared to smaller vehicles.


What is the towing capacity of the 1990 Olds Custom Cruiser?

the Oldsmobile Custom Cruiser is based on the same body that the Buick Roadmaster SW and Chevy Caprice SW used, meaning that it has a 5000 lb towing capacity if already equipped with a towing package, and 3500 if not.


How many quarts of transmission fluid do you need to put in a 1992 Oldsmobile custom cruiser after you change the transmission pan?

After changing the transmission pan on a 1992 Oldsmobile Custom Cruiser, you typically need to add about 4 to 6 quarts of transmission fluid. However, the exact amount can vary depending on whether the filter was also replaced and how much fluid was lost during the process. It's best to start with around 4 quarts, then check the fluid level with the dipstick and add more as needed to reach the proper level.


How do you change the power antenna on a 1990 olds custom cruiser?

To change the power antenna on a 1990 Oldsmobile Custom Cruiser, first, disconnect the negative battery cable to ensure safety. Remove the interior trim panel and any screws or bolts securing the antenna assembly, then carefully pull the old antenna out from the body. Install the new antenna by reversing the removal process, ensuring all connections are secure, and then reattach the trim panel. Finally, reconnect the battery and test the antenna to confirm it operates correctly.


Where is the Fuel pump fuse for 1991 custom cruiser?

The fuel pump fuse for a 1991 Oldsmobile Custom Cruiser is typically located in the fuse box under the dashboard on the driver's side. You can also find a diagram on the fuse box cover that indicates the specific fuse for the fuel pump. If you're having trouble locating it, refer to the owner's manual for detailed information.


Where is the fuel pump located on a 1989 olds custom cruiser wagon?

On a 1989 Oldsmobile Custom Cruiser wagon, the fuel pump is located inside the fuel tank. To access it, you'll typically need to remove the tank from the vehicle, as the pump is not externally accessible. Ensure to take proper safety precautions, such as relieving fuel system pressure and disconnecting the battery, before attempting any repairs.