Just unbolt it and pull it out. Then replace the gasket and reinstall the bolts. If you have a V6 there is a cover that goes with it. On the 4 cyl. You might find it easier to remove the manifold cover.
none
Replace the Oxygen Sennsor on the right side beind the Cat
How do you change oxygen sensor in 1992 Toyota corolla? Is there a model engine 4A-FE without a oxygen sensor?
labor cost to change an oxygen sensor in a 1995 toyota avalon
On 95 with V6 there are 2, one before and one after the catalytic converter(about 3-6 inches) in the exhaust system under the vehicle appx below drivers seat.
It screwed in to the exhaust manifold. To change it you unplug the sensor and unscrew it with an O2 sensor socket.
You need to pull the code. Don't take a chance.
Oxygen sensors are located on the exhaust manifold between the engine and the catalytic converter. If you have a V6 model then it will be after the place where the 2 sides come together. If your not sure what it looks like go to a web site for a local parts store and put in the information for your vehicle. They usually have a picture of the part.
The 1985 Toyota Corolla has one.
To change the oxygen sensors on a 2001 Toyota Corolla S, first, ensure the vehicle is off and cool. Locate the oxygen sensors; there are typically two, one before the catalytic converter (upstream) and one after (downstream). Disconnect the electrical connectors and use a wrench or oxygen sensor socket to unscrew the old sensors. Install the new sensors by reversing the process, ensuring they are securely tightened and properly connected.
You have two oxygen sensors in Toyota Rav4, One before the catalytic converter and another after.
The 1988 Toyota oxygen sensor is located on the air cleaner housing. You will find the sensor, on the back side of the housing.