Disconnect the battery. Remove the fuse board cover. Remove 3 bolts (10mm) retaining the fuse board. Lift the fuse board - underneath, either side of the 120 Amp fuse, remove the bolt (13mm) which is passed through the 120 Amp fuse legs.
You have to unbolt it from the front it is a pain in the butt. It will save you money in the long run. Pop the case off the fuse and push the two metal pieces together(exposed fuse) this will start the car and get you to the repair shop...
To change a blown 80 amp alternator fuse on a 1987 Supra, first, disconnect the negative battery terminal to ensure safety. Locate the fuse box, usually found near the driver's side under the dashboard or in the engine compartment, and identify the blown fuse. Remove the old fuse using a fuse puller or pliers, then replace it with a new 80 amp fuse, ensuring it is securely seated. Finally, reconnect the negative battery terminal and test the alternator to ensure proper functionality.
The Main fuse is in the fuse box under the hood on the drivers side. It is a 100 amp fuse.
The 120A fuse in a Hyundai Santa Fe is typically associated with the vehicle's power distribution system, specifically for the main power supply to various electrical components. It helps protect the vehicle's electrical systems from overloads and shorts. If this fuse blows, it can lead to issues with starting the engine or powering accessories. Always refer to the owner's manual for specific details regarding the fuse and its functions for your model year.
To remove the 120A battery fuse from the hood compartment bay of a 2004 Hyundai Tiburon, first ensure the vehicle is off and the keys are removed. Locate the fuse box in the engine compartment, then carefully unclip or unscrew any fasteners holding the cover in place. Once the cover is removed, use a fuse puller or a pair of pliers to grasp the fuse and pull it straight out. Always check the fuse for damage before replacing it.
In a 1987 Toyota Supra, the fuse for the cooling fan is typically located in the fuse box, which is found under the dashboard on the driver's side. You can identify the correct fuse by referring to the fuse box cover or the owner's manual, which will provide a diagram indicating the specific fuse for the cooling fan. If the fuse is blown, replacing it should restore functionality to the fan.
To change the flasher fuse on a 1993 Chevrolet Caprice, first locate the fuse box, which is typically found under the dashboard on the driver's side. Identify the flasher fuse, which is usually labeled in the fuse diagram on the cover or in the owner's manual. Use a fuse puller or pliers to carefully remove the old fuse, then insert a new fuse of the same amperage. Finally, test the turn signals to ensure they are functioning properly.
Under the glove box behind the panel by the door.
Its in the passenger footwell kick panel. http://www.rclambert.com/supra/blower/mk3%20blower%20motor%20removal.htm this site will show you where it is at.
there is a fuse box under the driver's side dashboard, underneath and towards the door. you cannot miss it.
To change the lighter fuse on a 1993 Ford Explorer, first, locate the fuse box, which is usually found under the dashboard on the driver's side. Use the diagram on the fuse box cover to identify the specific fuse for the lighter, typically labeled as "CIG" or "Lighter." Remove the blown fuse using a fuse puller or pliers, then replace it with a new fuse of the same amperage. Finally, check to ensure the lighter is working properly before closing the fuse box.
left inside kick panal 2nd row 2nd to the last 15 amp fuse