Want this question answered?
50-75 USD
50-75 USD
No known sn data has been published.
You have not asked a question yet. Please reword it, and try again.
60 or so
Remove the slide. Push firing pin forward with 1/16" pin punch & then put a 3/32" pin punch between the back end of the firing pin & the back of the slot in the slide to hold the firing pin forward. Place the end of a small straight tip screwdriver between the right side end of the safety & the interior wall of the slide. Now twist the screwdriver to move the safety out to the left side of the slide. As you do this slowly, be carefull not to let the safety plunger & spring fly away on you. Mine tends to pretty well stay in the hole & not fly out. Once you have the safety out of the slide, carefully remove the 3/32" pin punch holding the firing pin forward to allow removal of the firing pin & spring. Reverse the procedure to reinstall.
Düm Tek Tek was created in 2008.
if your mitsu grandis tappets are noisy, tek tek tek especially on idle change oil and filter and add pro-ma mbl8. mine was noisy and it went away like magic make sure you change filter could also be low pressure to lifters. I still have a black exhaust problem .... will sort it and post blog
nail tek renew
Vedat Tek died in 1942.
Vedat Tek was born in 1873.
Tek Jansen was created in 2005.