The crank position sensor is located on the back side of the engine (the side that faces the firewall) slightly above the starter on the engine block at the number 3 cylinder. It is held on by one 10mm bolt and the wiring plugged into it. I would recommend removing the starter to change this sensor as it will be much easier.
A crank sensor was not USED on a 1995 model.
Where is the crank position sensor hole on a 2003 Blazer
how to ins toll a crank sensor on a 95 Mitsubishi 6v, but first of all my car crank to the point that it wanted to start but it does not start what might be the problem.
That year did not use a crank sensor.
The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.
yes it dose, it has a cam sensor and a crank sensor,
Where is the crank sensor on a 95 chevy lumina car ?
No. OBD1 = CPS.
on the 1998 the camshaft sensor is in the distributor ,you have to change it....you have to change the whole distributor..the sensor is integrated. the crankshaft sensor is located on the block under the cruise control actuator
The 95 models did not use or have a crank sensor. If you are not getting any fire at the plug wires, then you probley need to replace the ignition module that is inside of the distributor.
he radiator
yes