When you don't have the needed remover tool, it's a mechanic's job; it's inexpensive because only the assy belt has to be removed, the clutch pulled and then reasambled with a new part.
To change the clutch you need to remove the engine, the transmission or both. The clutch is BEWEEN the engine and transmission and you can't get it off without separating them.
There is no clutch cable its hydrolic.
you will need to remove either the engine or the transmission(engine is easiest in the 94 escorts) replace the clutch and put the engine back in
im sure this is on the clutch pedal itself.
The 1994 Chevrolet Astro V-6 engine temperature sending unit can be located on the front of the engine. The temperature sending unit will be next to the thermostat housing.
In front of the engine behind the a/c condensor
Sure, its the sameengine
It is built into the engine control computor.
It is attached to the lower part of the engine block.
18436572
The firing order for the 1994 Chevrolet Beretta is 1, 2, 3, 4, 5, 6. This is for the 3.1 Liter engine.
A 1994 Chevrolet Beretta with the 2.2 or the 3.1 engine takes a 105 amp alternator.