When you have the hood open, looking at the headlight housing, there are two bolts at the top of the housing that need to be removed. You may have to remove the black plastic cover to access both of them.
When the bolts are removed, lift from the top and it should pull out. You will need to turn the bulb retaining ring to free the bulb from the housing.....reverse the instructions to put it all back together.
make sure you fill up your headlight fluid after you change the bulb
u have a blown headlight. change both bulobs and it will stop.
Did you ever find out how to change the headlight assembly? If so, please let me know how to do it :)
A 2001 Pontiac Sunfire has 115 HP to 150 HP. The average miles per gallon for gas is 23 city and 32 highway.
It should be in the fuse panel with all of the rest of the fuses.
Cannot locate canister purge valve on a 2001 pontiac sunfire 2.2
headlights and dash lights in 2001 sunfire wont turn on.
In the fuel tank
A 2001 Pontiac Sunfire requires 1.8 quarts of DEXRON III fluid for the 5-speed manual transmission.
Approxiamtely 4 litres.
Yes, as are all the Sunfires.
Should be 195/70R14.
i have a 2001 pontiac sunfire antitheft problem will not start anttheft light flashs on dash i can turn motor over buy jump starter but will not start
The 2001 Pontiac does not have any lubrication points. All of the components on the automobile are sealed and do not need to be lubricated.
It is important to know the general location of the parts in a car. The 2001 Pontiac Sunfire fuel injector is located under the hood, right in front of the engine cover under the hood of the car.Ê
no.... Pontiac changed to a new transmission in 2000
18'' and 22'' pretty sure.
Car has manual transmission.
Have a look at Crutchfield's website, www.crutchfield.com
When changing the transmission fluid of any car, it is important to know how much fluid to put in. A 2001 Pontiac Sunfire takes 2.5-3 quarts of transmission fluid.
No, you do not have to remove the battery. Just remove the 2 bolts (1/2 socket) on the top and pull out the whole assembly. Then undo the big plastic nut and remove bulb and redo steps to install.