take out the headlight. you'll be able to see the back of the parking light once you do this. the wiring harness should come off with a slight twist and a gentle pull. change you're lame plug and reverse the procedure
change the socket the bulb fits in.. can be purchased at pepboys autozone etc
Never as the 1998 Chevrolet Cavalier does not have a belt, it has a chain that should last the life of the engine.
THERE IS NO PARKING LIGHT LENSE FOR THE REAR. IT'S ONLY THE TAIL LAMP ASSEMBLY!
To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
check the fuses.
No
Dark Brown for all parking and side marker lights.
Both the front and rear bearings on a 1998 Cavalier are contained in the hub assembly. The rear hub is attached with four bolts, and the front with three.
I believe it is 2 torx screws inside the tailgate holding the assembly. Have to replace the whole assembly.
You must drop the gas tank
Have vehicle scanned to determine the problem
There is a short in the signal light circuit.