There is a torx screw on the same side as the button, unscrew it half way and lift up the shift with the boot.
Here's how to remove it. http://www.youtube.com/watch?v=hH2qZPIK7jQ
unscrew the knob
It is glued on you have to replace the entire stick shift
There is a clip on the front of the knob. Pry it out with a screwdriver.
twist it off
look at your shift knob for mine(1997) just take to gear 2 and look u will see a litle metal clip .. take a screwdriver and get it out .. and than just get out your shift knob :P
== ==
Is this a standard transmission, or an automatic? automatic
The shift knob comes off with a counterclockwise turn, use some elbow grease some of these are hard to remove.
The shift knob should be held on by set screws if its a manual or threaded on if its an auto, in the case of an auto you would have to disconnect the shift button to change the handle. The shift knob should be held on by set screws if its a manual or threaded on if its an auto, in the case of an auto you would have to disconnect the shift button to change the handle. The shift knob should be held on by set screws if its a manual or threaded on if its an auto, in the case of an auto you would have to disconnect the shift button to change the handle.
Unscrew it.
Look on the front of the knob towards the dash, at the base of the knob you will see a pull pin that you take out and the knob will come off.