twist it off
How to peplace A RANGER transfer case SHIFT MOTOR
In most cases, you will find the speed shift sensor for your 1998 Chevy Blazer located on the backside of your transfer case. The transfer case is located on the transmission.
It can be. If it's an automatic with the electronic NP233 transfer case, you should remove the driveshaft. If you have a manual transmission or the manual NP231 transfer case, you should shift them into neutral.
Remove all wires attached to the transfer case. Remove the driveshafts. Drain the fluid out of the transfer case. Place a transmission jack under the transfer case. Unbolt the transfer case from the transmission. Unbolt the crossmember the transfer case rests on.
drop the pan and replace it
What does a transfer case shifter motor do
Will a transfer case from a 91 Chevy silverrodo fit a 2001 Chevy suburban?
NO. If you keep finding yourself ADDING transmission fluid often and you have no leaks but the transfer case is over full then you need to remove the transfer case and replace the seal in the transfer case where it bolts to the rear of the transmission.
will a 95 chevy k1500 transfer case hook up to a 96 chevy k1500 transmission
A 1996 Chevy Blazer Does have a transfer case IF it is equipped with 4 wheel drive
The fill plug is on the left side of the transfer case. You remove the fill plug, and the fluid should come to the bottom of the fill plug.
You have to remove the drivers seat and pull up the carpet.