Head Gaskets and Valve Covers
Oxygen Sensors
Chevy Blazer S-10
Plumbing

How do you change a valve?

161718

Top Answer
User Avatar
Wiki User
2005-12-08 08:01:21
2005-12-08 08:01:21

What kind of valve?

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

You can change the 2005 Honda E GR valve by removing the vacuum hose from the valve. Remove the valve retaining screws. Reverse the process to install the new valve.

User Avatar

How do you change the ac expansion valve on a 2001 Honda civic

User Avatar

faulty ball valve change the diaphragm washer faulty ball valve change the diaphragm washer faulty ball valve change the diaphragm washer

User Avatar

hoe tdo you change a valve cover gasket on a daewoo nubira

User Avatar

It is in the driver side valve cover, you must change the valve cover to replace the PVC valve.

User Avatar

* The PCV valve is located in the valve cover. * Detach the hose from the valve cover and pull out the PCV valve

User Avatar

does the 2006 silverado have a pcv valve

User Avatar

The PCV valve for a 2000 Blazer is mounted in the top of the valve cover. The valve plugs in and easily replaced.

User Avatar

replaced crank case valve location at valve cover

User Avatar

To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.

User Avatar

close it with a valve wrench, change the o-ring

User Avatar

By shutting off the water supply prior to this valve of course

User Avatar

how to change a valve cover gasket on a 97 mercury grand marquis ?

User Avatar

It is very important to change PCV valve. If valve is old it will plug or seize. This will cause oil pressure to rise and may cause leaks. Most likely the valve cover gaskets will leak if PCV valve is plugged.

User Avatar

Shut off valve at the wall? Turn the main water line off and change it. How you change it would depend on what type it is and how it attaches to the pipe.

User Avatar

Valve stem seals? Either you change the valve stem, or you change the valve core. Depends on where your air is leaking from. If it's the valve core, you simply take a valve core removal tool or pocket screwdriver with a valve core removal end (either one can be had cheaply at an auto parts store), uncscrew the old valve core out, insert the new valve core, and tighten it in. If you're replacing the entire valve stem, best to let a tire shop do this, as your tire will have to be dismounted, remounted, and balanced again.

User Avatar

The PCV valve should be on top of the valve cover at the back. The valve just plugs in, and slides out of the rubber hose.

User Avatar

where do I find the egr valve on a 1999 Chevy Cavalier?

User Avatar

in what location can I find the pcv valve on my 2002 chevy tahoe

User Avatar

How do you replace the EGR Valve on a 2001 Ford Escape?

User Avatar

were and how do you change a PVC valve on a Chevy avalance

User Avatar

Remove the heater control valve and replace it.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.