On the right side of the engine compartment there should be a hose coming out from the bottom of the motor with a cap on the end. (it looks like a hydraulic hose) Using a couple of wrenches, one to hold the line and one on the cap, remove the cap and the oil will start coming out. Pull the dipstick out to allow the oil to flow faster. Once the oil is drained put the cap back on, change the filter and refill with new oil. The oil filter is the one on the block just below the throttle linkage and the filter number at NAPA is 1068, use 15W40 oil.
where is the drain plug for hydraulic fluid on 743 bobcat
No, I change last week an Engine (Peugeot XUD9) at a Bobcat.
the oil capacity for a bobcat 773 with oil filter is 7.5 quarts
It is a filter that is used for filtering the oil in a Bobcat 763.
The motor oil capacity of a Bobcat 763 skid steer is four quarts. The Bobcat 763 skid steer hydraulic oil capacity is three gallons.
7.5 QUARTS OR 7,1 LITER 753 BOBCAT DIESEL from bobcat service manual
Any type of Motor oil
Bobcat 873g with Deutz Model BF4M1011F Turbo Charged engine (73hp):CapacitiesEngine Oil with filter 16qtsFuel 25 galsHydraulic Reservoir 22qtsHydraulic System 13galsChaincase Reservoir 10galsInformation taken right out of Bobcat Service Manual for 873 G series
9 quarts
how to change the drive belt and new idler pulley on a 2002 763 bobcat. how hard 1 -10
create a password on a bobcat 205 skid steer
8.5 gallons with reservoir.