You can download an owners manual from Cyrsler.com (go to the "for owners" page). This is from the 2005 model (I'm in the same boat) but it should be pretty much the same: Back Up Light Bulb 1. Remove the screws attaching the back up light to the rear fascia and remove the housing. 2. Remove the socket from the housing. 3. Pull the bulb out of the socket and replace. This should allow you to get at both the reverse indicator and brake light bulbs! You can download an owners manual from Cyrsler.com (go to the "for owners" page). This is from the 2005 model (I'm in the same boat) but it should be pretty much the same: Back Up Light Bulb 1. Remove the screws attaching the back up light to the rear fascia and remove the housing. 2. Remove the socket from the housing. 3. Pull the bulb out of the socket and replace. This should allow you to get at both the reverse indicator and brake light bulbs!
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
The light assy has to be removed and the bulbs removed from the back.
Remove the two screws that hold the lens on, remove the lens and change the bulbs.
The brake light bulbs ar removed from the rear of the light assy . Take it off of the body.
If you mean the brake light, you just have to change the bulb or bulbs.
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
Headlight bulbs, high and low beam, parking light bulbs, signal light bulbs, brake light bulbs, dash light bulbs, interior light bulbs, plate light bulbs, etc.
I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
check light bulbs and fuses. light bulbs have 2 elements in them, one for stop and one for running. if thses are ok, replace brake light switch on brake pedal
If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk. If you are referring to the right and left ones, pull the carpeting away and you will find like 4 nuts that you remove and the whole assembly comes out to change the bulb or bulbs. The 3rd brake light in the rear window has two bulbs which you get to from the trunk.
there is 3 bulbs