0
you need to remove the caliper. then use one of the old pads along with a c clamp. put the old pad on the caliper piston then apply the c clamp till the caliper piston is completely closed. install new pads then reinstall the caliper. do the same for the other side. once you are finished crank up the vehicle and pump the brakes up until they are firm before you move the vehicle.
What else can I help you with?
How do you find Pictures of a 1989 jeep Comanche?
go to www.google.com click on images and type in 1989 jeep comanche multiple images will appear
What is the price of a Jeep Comanche?
The price of a Jeep Comanche ranges greatly depending on the car's model year. A 1989 Jeep Comanche costs roughly $3000, while a 1988 Jeep Comanche can cost anywhere from $2000 to $4000.
How do you change the parking brake cable in a 1988 jeep Comanche?
To change the parking brake cable in a 1988 Jeep Comanche, start by safely lifting and supporting the vehicle. Remove the rear wheels and brake drums to access the parking brake components. Disconnect the old cable from the brake lever and the rear brakes, then install the new cable by reversing the process, ensuring it is properly adjusted for optimal performance. Finally, reassemble the brake components and test the parking brake for proper function before lowering the vehicle.
What would cause a Jeep Comanche to stall when preass ing the brake?
brake booster vacuum leak,or bad brake booster.
What is the correct spark plug gap for your 1989 jeep Comanche?
Check under the hood, behind the Brake Master cylinder. There is an Vehicle Emmission Control information label or decal that has this information on it
What does a voltage regulater look like on a 1989 Jeep Comanche?
it is likely inside the alternator
When was Jeep Comanche created?
Jeep Comanche was created in 1985.
1989 Jeep Comanche wiring diagram?
I got a Haynes repair manual for jeeps .It was a good help for me
Headlights and tail lights do work. Why brake lights and turn signals front and back don't work on 89 Jeep Comanche?
If the brake lights and turn signals on your 1989 Jeep Comanche are not working while the headlights and tail lights function correctly, the issue could be due to a faulty combination switch, a blown fuse, or a problem with the wiring or connectors related to those specific circuits. It's also possible that the brake light switch, located near the brake pedal, is malfunctioning. Checking these components systematically should help identify the source of the problem.
How to fix wipers on a 1989 Jeep Comanche?
Resubmit question describing what is happenign or not happening. This question is too broad.
How do you replace 1989 jeep Comanche clutch slave cylinder?
Remove the transmission to excess the inturnal slave cylinder
Who built the 2BF18 five speed manual transmission that is in my 1989 Jeep Comanche?
Peugeot BA 10/5
