suggest purchase service manual because procedure is not hard but lengthy.auto zone or advance have them for $18.95.
FRONT OR REAR ?
which engines? 1.8,2.0,2.4,3.0 liter ?
take caliper off, and then remove brake pads... piston for the brake caliber must be spun in to reset it. dont try to puch it in, it will not move...
Where is the brake fuse on a 1990 Toyota previa
Mounted on top and inside the fuel tank.
first take out the brake pump out, then from inside the car, you will have to loose 4 bolts that hold the booster, and a pin with a clip that attach the pedal to the booster
On my 1990 Buick Regal, I need an 18mm wrench , a 10mm wrench, screwdriver, jack, and a can of brake cleaner
When changing the brake rotors on a 1990 Toyota 4runner the vehicle must be safely raised and propped up. The calipers must be loosen and rotors will be able to be removed. The process must be repeated for all four wheels.
Open the tailgate. About 5" back from where the tailgate closes, there are two 10mm screws on the edge.
Removing and changing brake pads is pretty simple. Lift the car on a jack, remove the tire, remove the brake shoe/caliper, remove the old brake pad, put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car to the ground.
Replacing brake pads is a pretty easy task. One must remove the tire, remove the brake shoe, remove the used pad, replace it with a new brake pad, replace the brake shoe, and replace the tire.
NO.