Want this question answered?
To program your remote you have to search for the local channels in your area.
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
a tv remote used to change channels
To connect a digital TV converter box, follow these steps:1. Disconnect antenna from TV2. Connect antenna to antenna connection on Converter box.3. Connect an antenna cable from the converter box to the TV's antenna connection.4. Turn the TV to channel 3, turn on the converter box, and follow the setup menu from the converter box to search for channels.5. Keep the TV on channel 3, and change channels using the remote control for the converter box.
There was buttons on the tv box itself
how to program a universal rca remote to a dtv craig converter box
With today's TV's all you have to do is connect the TV to a signal source like cable or an antenna, go to the menu using your remote, and have it do a channel search. When it gets done, you should have all the channels available. If it's a newer TV with analog and digital tuners, you'll have to do an analog channel search and then a digital channel search.
Most boxes have buttons to do it the old way until you get a universal remote
To change channels on PIP (Picture-in-Picture), you can typically do so using the remote control. Look for the PIP button on the remote, then select the channel you want to view in the PIP window while the main screen shows the current channel. This allows you to switch between channels easily while still keeping an eye on your main program.
how to program a universal rca remote to a dtv craig converter box
Change my t.v
You can still program the remote with the converter box off if you know the code. Then Use it to turn the converter on.