0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the best tool to use for cutting a hole for a cat flap in a door which has aluminium in the middle?
probably a sawzall with a metal blade
What are metal bandsaws used for?
Metal bandsaws are used for the purpose of cutting metal. These saws are available with either a vertical or horizontal blade and usually also have brushes to prevent metal chips from getting stuck in the teeth of the blade.
What does a hacksaw cut?
A hack saw is for cutting metals. It has a disposable blade and you can choose from many tooth sizes and teeth per inch, this allows cutting of a wide range of metals, soft to very hard.
How do you bend conduit?
A piece of nylon string worked back and forth will work, it's slow but it will work. Using the string allows you to move around the pipe cutting it without cutting the wires. It sometimes takes awhile and it's not easy, it also uses alot of string but it is fairly safe.
How Key Cutting Works?
Key cutting as it is acknowledged comes from the metalworking term 'cutting' which refers to 'shaping material by removing parts'. Here the similar thing is done with a piece of metal to create the shape of the key by removing excess metal around the edges. This is the major form of copying keys and is something many locksmiths still offer. To cut a key there will be two keys inserted into vices in a key cutting tool. Of these keys one will be the innovative key that needs copying, while the other will be a 'blank' key, meaning that the blade has no grooves or indentations which are used to remove the pins inside. Instead they will just have a blade coming out of the handle with a completely flat end
Brush Cutter Blade?
form_title= Brush Cutter Blade form_header= Keep your landscaping beautiful with a brush cutter blade. What size blade do you need?*= _ [50] What brand do you prefer?*= _ [50] Are you replacing an old blade?*= () Yes () No
What is a jigsaw cutter?
A jigsaw is a hand held electrical tool with a narrow saw blade, used for cutting timber, the narrow blade allows the cut to turn corners, or cut intricate pattern's
What is a vinyl cutter?
A vinyl cutter is a scratch free blade which cuts all types of vinyl. However the blade is easily broken so you should use a different cutter. Hope this helps people of the world!
How do you dull a pipe cutter blade?
By using it a lot
Can a diamond blade on a rock cutter cut you?
You can assume that yes, a diamond blade running on a rock cutter will not only cut you, but may separate you from significant parts of your body.
How do you pop a blade out of a razor?
It depends on how cheap they are. If they are the disposable ones then it will be easier. what you do is you pop the shorter sides off and from there it should be easy to just dismantle the rest of the razor. (ps, if you are a cutter- happy cutting ;))
What is the cutting edge?
On a blade, the cutting edge is the sharp side.
How do you cut iron steel?
Iron or steel can be cut by using:hydraulic sheers (like a powerful paper cutter)a saw blade made from a harder allow of steellaser cuttingabrasive cuttinghydraulic cutting (just water or with abrasives)grindingacetylene (or other gas mixture) cutting torchesthermal lances
What type of metal would need a hacksaw blade which uses 32 teeth per inch. (t.p.i.?
A blade with those teeth is for cutting very hard metals.A blade with those teeth is for cutting very hard metal
What is the difference between shearing and cutting?
Shearing requires one blade to pass over another blade or a fixed edge. Cutting only requires one blade.
Do you need to change a diamond blade on a wet saw?
They will wear out at some point. You just have to judge if it is still cutting alright or not.
What is a combination blade?
On a circular saw, a combo blade is one that can be used for both ripping and cross-cutting wood. Ripping is done by cutting with the grain of the wood.Cross cutting refers to cutting across the grain.
