You need to remove the brake calipers, make sure that you push back the caliper pistons (monitor level of the fluid in the brake fluid reservoir, you might have to get rid of some). After that install you pads. Make sure that you have tighten everything properly. Press the brake pedal to check if your brakes are working.
PS: Never press the brake pedal if brake system is not completely assembled.
To change the front brake pads on a 2004 Toyota Camry, start by lifting the front of the car and removing the wheels. Then, remove the caliper bolts and carefully slide off the caliper, supporting it to avoid stressing the brake line. Next, take out the old brake pads and replace them with new ones, ensuring they are properly seated. Reassemble the caliper, tighten the bolts, and repeat for the other side before reattaching the wheels and lowering the car.
The 2004 Toyota Camry has 39.2 in. of front head room.
The 2004 Toyota Camry has 41.6 in. of front leg room.
The 2004 Toyota Camry has 57.5 in. of front shoulder room.
The 2004 Toyota Camry has 54.4 in. of front hip room.
The front track of the 2004 Toyota Camry is 5 ft. 0.8 in. (60.8 in.).
You should do that through the master brake cylinder.
Change the brake pads sensors. You must change them after every brake pad swap.
Please Help
The 2004 Toyota Camry has front wheel drive.
I was unable to locate the oil filter on 2004 Toyota Camry (4 cylinder). Does anyone know where it is, and how to replace it? its is on the passenger's side of the car but more to the front where the wheel is. i had the same problem.
min rotor spec is 26.0mm