Unfortunately you will need to go buy the torx head socket to do it. Probably the same as mine (2002). if so it is the T55 size. Phone your local Chevy dealer and make sure the size.
About $400.00 each. Front and Back double.
T55
My 92 Silverado right front brake sticking why
Wheel bearing? Worn Brake pads?
The Brake line tubing is 3/16 single flair front is double flair
Tap off the rotor, it should come off, if not, I can't help you.
It takes a FA12A Allen wrench.
take off the 2 bolts holding the brake caliper on lift it up off the break drum remove the old brake pads . Use a c clamp to push the plunger back in incert the new pads bolt it back in place.
It's a sealed unit with the hub. You have to replace the whole hub assembly.
a torx bit size t-55 for front brakes
blown brake hose, front passenger side in 1997 chevy malibu?
You have to remove the calipers and brake pads to change the brakes on a Chevy Equinox. There's a how to video included below in the related links section that will show you how to change them.