go to halfords they'll do it for you,
needs to be done with a diagnostics machine.
To change a front side light bulb in a 2000 Opel Vectra, first, open the hood and locate the back of the headlight assembly. Twist the bulb holder counterclockwise to remove it, then pull out the old bulb. Insert the new bulb without touching the glass, reattach the bulb holder by twisting it clockwise, and test the light to ensure it works before closing the hood.
To change the front fog light bulb on a 2008 Vectra C, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by turning the steering wheel fully to one side to create space. Remove the fog light cover or housing by twisting it counterclockwise, then disconnect the wiring harness. Replace the old bulb with a new one, making sure not to touch the glass with your fingers, then reassemble the housing and reconnect the wiring.
u need to drop d bumper by unscewing the scews beside front weels this will alow u to take out d light
I have a 52 vectra and on mine it means that brake pads are low. There is a sensor on front nearside.
The Vectra warning light is called the engine management warning light. It tells you that you need to get your Vectra checked by a mechanic.
take out glove box remove light for glove box it right in front
look on the vectra forums
HOW DO I CHANGE LIGHT BULBS
To reset the immobiliser in a Vauxhall Vectra GTS 1.8 petrol, you typically need to use the key fob. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10-15 minutes until the immobiliser light goes out, then turn the key off and attempt to start the vehicle. If this does not work, consult the owner's manual or a professional technician for further assistance.
enough petrol to get you to a petrol garage anywhere in the UK
The petrol light comes on because you are very,very low on petrol.