Remove brake caliper, then caliper mounting. Now tap back of rotor to remove it. Now undo large nut holding hub and pull hub off. Replace in reverse order.
With the wheel off, remove the calipers, then the rotors just come off.
Remove the wheel, remove the caliper, and the rotor will just come off.
Under the car, drivers side, just in front of the rear wheel.
If just 1 wheel at a time use the frame just behind the front wheel/ rear in the front of the wheel. For trolley jack, the center support in the front, and for the rear the diff. center.
On a 1989 Ford Crown Victoria : ( there are 5 lugs per wheel , total of 20 )
Should be just one. Under the car, in front of the drivers side rear wheel.
Remove the front wheel then remove the 2 caliper bracket bolts behind the rotor and the rotor should slide off.
5 per wheel
The fuel filter, is located on the passenger side, just in front of the rear wheel well, connected to the frame.
5 per wheel
( 5 ) per wheel
No , it's rear wheel drive