(1) Open hood (2) Reach behind the headlight housing and unplug the electrical connector and remove the rubber boot (3) release the bulb-holder retaining clip and pull the bulb-holder assembly straight out (4) wearing clean goves or using a clean cloth carefully remove the halogen bulb and replace. (5) re-assembly is the reverse. of removal. (CAUTION: do not get any foreign matter or oil on the new bulb - they are extremnely hot in operation and foreign matter sicking to the glass bulb could cause it to explode.)
To change the headlamp on a 2000 Plymouth Breeze, first, open the hood and locate the headlamp assembly. Disconnect the electrical connector from the back of the headlamp by pressing the tab and pulling it off. Remove the retaining clips or screws securing the headlamp assembly, then carefully pull the assembly out. Replace the old bulb with a new one, reassemble everything in reverse order, and test the new headlamp.
every 160000km with water pump also
driver left of the oil filter on a 2000 crv
Yes , the 2000 Honda CRV has an interference engine ( according to Gates - they manufacture timing belts etc. )
try yahoo answers many people know the answer to this and will asnwer you almost immeditally
How do you change the differential (rear) in 2005 Honda CRV
How do I change headlamp on 2006 Lincoln Town Car
pull up on the 2 tabs that hold it to the housing. then siply twist the bulbs out of their sockets
is the 2000crv have a interference
How do I change my fuel filter on my 2002 Honda crv? Where is it located at? How do I change my fuel filter on my 2002 Honda crv? Where is it located at?
Remove the wiring harness from the back of your 1999 Chevy Astro headlamp. Remove the headlamp retaining bolts. The headlamp will come out. Reverse the process to install the new headlamp.
Possibly the lifters?!?