there is a cross member that covers the radiator and hold the headlights in place, there are about 10 bolts that need to come out, after removing them you should be able to take that out and have access to the headlight.
To adjust the headlights on a 2000 Chrysler LHS or 300M, park the vehicle on a level surface about 25 feet from a wall. Measure the height of the headlights from the ground and mark this height on the wall. Open the hood and locate the adjustment screws on the headlight assembly; typically, there is one for vertical adjustment and one for horizontal. Use a screwdriver to turn the screws until the beams align with the marked height on the wall and are aimed slightly to the right.
Yes.
the 300M if it has the hemi engine.
Change your input speed sensor. They are cheap at Napa -- and easy to change
A 2000 Chrysler 300m does not have a heater valve. The cabin temperature is controlled by airflow doors.
Yes
no
Belt
V6V6
DOT3 or DOT4
You need to multiply 300m by 100cm since there are 100cm in a meter. You should be able to solve that mentally.
what bulb? if you need to change exterior front or rear or indicator? let me know.