Under the steering wheel shaft is a plastic cover held in place with 2 Phillips screws. Take off the screws and the cover. Now you see the barrel. You will see a tiny black hole in the barrel. This takes a metric Allen key. You need to loosen the Allen key or forget it. The wiring is held in a clump by a plastic holder and that just unplugs. Put the key in the ignition because usually the steering wheel lock needs to be released. and with the key in you should be able to pull it out.
See Q: How do you remove Steering wheel lock VW golf mk2?
To change the gear knob on a golf MK2 too need the tool box that will help you open and get access to the area that has the gear knob. You can then change the gear knob from this point.
The price for a VW Golf MK2 city STROMer was at $34,000. (U.S.) up until its production was ceased in 1985. The VW Golf MK2 had a range of about 31 miles.
yes...but you have to change and modify a few engine mounts and so on. And modify or change the whole el-wiring in the car
well you have to buy a haynes manuel and it explains it in verry good detail
yes i just put my 8v box on my 16v bolts straight on
Yes, a starter motor from a 1.6 will fit a 1.8 and vice versa.
Nope
To change the heater core in a VW Golf MK2, start by disconnecting the battery and draining the coolant. Remove the dashboard and the center console to access the heater box. Disconnect the hoses from the heater core and unbolt it from the heater box. Install the new heater core, reassemble everything, and refill the coolant before reconnecting the battery.
The best way to find the price of the Volkswagen Golf MK2 would be to contact a Volkswagen dealer. The price will certainly depend on the amenities that are desired.
about 4qts
No it is not