To change the gear knob on a golf MK2 too need the tool box that will help you open and get access to the area that has the gear knob. You can then change the gear knob from this point.
See Q: How do you remove Steering wheel lock VW golf mk2?
The price for a VW Golf MK2 city STROMer was at $34,000. (U.S.) up until its production was ceased in 1985. The VW Golf MK2 had a range of about 31 miles.
Yes, on a Mk2 Golf GTI 16V, it's generally necessary to drop the engine to change the core plugs, especially the rear ones. Access is limited due to the engine's position and the surrounding components, making it difficult to reach the core plugs without removing or lowering the engine. While some may attempt to do it without dropping the engine, it is not recommended due to the complications involved.
yes...but you have to change and modify a few engine mounts and so on. And modify or change the whole el-wiring in the car
well you have to buy a haynes manuel and it explains it in verry good detail
yes i just put my 8v box on my 16v bolts straight on
Yes, a starter motor from a 1.6 will fit a 1.8 and vice versa.
Should be a permanent fix. However it may plug the small passages in the heater core
Nope
The best way to find the price of the Volkswagen Golf MK2 would be to contact a Volkswagen dealer. The price will certainly depend on the amenities that are desired.
The fuse for the heater is located in the main fusebox to the right of the steering wheel under the dashboard on RHD Models. It depends what your problem is really but Usually faults with the heater model relate to the heater motor resistor located on the actual heater motor itself. On the extreme left underneath the dashboard. Volksland.com