Not sure *which* light cover is being asked about, but the "Related Questions" below will cover all 3: headlight, taillight & running light in the front bumper cover
we can change it through decreasing its value.
How do you remove the brake light cover on a ford focus
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
On a 2001 Ford Windstar : The warning light in the low right corner of your gauge cluster is the ( low washer fluid warning light ) * according to a drawing in the owners manual *
It is very easy to change the license plate bulb in a 2001 Dodge Intrepid. You will need to remove the tag and then unscrew the light cover. After the cover is off, unscrew the light and replace with a new one.
Open the trunk, there is a cover that is bolted on. Take off the bolts for the cover, and then you can take out the bulb and replace it.
The 2001 Windstar is rated at 200hp
On a 2001 Ford Windstar : That warning light means that one of your exterior bulbs has burned out ( the warning light between the door ajar warning light and the low engine coolant warning light , located in the lower right area of your gauge cluster )
You should remove right defence cover first.
To change the spark plugs in a 2001 Ford Windstar, first, ensure the engine is cool and disconnect the battery. Remove the engine cover, if applicable, and locate the spark plug wires or coil packs. Carefully disconnect the wires or coils, then use a spark plug socket and ratchet to unscrew the old spark plugs. Install the new spark plugs, ensuring they are properly gapped, and reconnect the wires or coils before replacing the engine cover and reconnecting the battery.
I was looking at the 2001 Ford Windstar Owner Guide and the warning light : above the tachometer is the check fuel cap light below the engine temperature gauge in the middle is the bulb warning light , one of the exterior bulbs has burned out
change it from the inside