Want this question answered?
The temperature valve actuator is located on the front of the heater case
If I'm not mistaken, it does not have a pcv valve, my 2000 doesn't have one on it...
Valve actuator are important for installing certain pipes correctly. With out them you can be in for major pipe damage and thousands in repairs.
The lift actuator is mounted to the front of the main control valve. The main control valve is underneath the cab on the right side of the loader. You will see two black things about six inches long sticking out of the front of the valve. The lift actuator is the one on the bottom. You can change it out yourself but the dealer will have to calibrate it with the laptop computer.
actuator is a mechanism that will responds to hydraulic,pneumatic and electrical signal ,it is used to control the valve that to be in open or close condition.
When a pressure signal is applied, the valve shaft moves in the direction opposite that of the direct-acting actuator, but it follows the same operating principle. In the reverse-acting actuator, the valve shaft is pulled into the actuator by the application of a pressure control signal.
33"
The main function of a valve actuator is to control the valves ON to Close or modulating the valve,and the motor operated valve actuator is one important kind of valve actuator,the main different between kind valve actuators is it drive by electric power.
a Three Way Solenoid valve is required to operate a double acting Pneumatic Actuator , depending of the orientation of the Actuator could operate as a Fail to open or Fail to Close .
Which actually Actuates the Steam Control Valve
behind the throttle body
The tyre pump cylinder has a cup shaped non-return valve/seal connected to the actuator rod. When the rod is withdrawn from the cylinder the valve opens and air enters. When the actuator is pushed into the cylinder the valve closes, sealing the actuator plate against the inside of the cylinder, compressing the air in the cylinder and forcing it into the tyre.