well, how do you replace the motor mounts on this car?
you will have to raise the motor up by taking the motor loose at the mounts just enough to get the oil pan off.
2
It has four total mounts.It has four total mounts.
you'll have to modify motor mounts and change wiring harness "pretty tough".
If they are both 3100 engines...yes. Direct swap. The only thing you MAY have to change would be the motor mounts.
General instructions for replacing motor mounts on ANY vehicle: Put a floor jack under the engine, distributing the weight evenly using a board or some other object, just take the weight from the motor mounts by jacking up the engine slightly. Loosten the nuts that hold the engine to the motor mounts, jack up the engine until you have an inch or two clearance. finish removing the motor mounts, then put the replacment motor mounts in the same place. Lower the engine back onto the motor mounts, but keep the weight off the motor mounts until you have put the nuts back in place. After everything is back in place, take the rest of the weight off the jack and you're done.
There are four, front, back, left, and right.
explorer engine mounts removal
About $12 a piece (accents have four engine mounts) plus labor.
my motor light is on my 1998 e320
how do i locate the coil pack on a 1998 Mercedes c200
Inspect the transmission and motor mounts. You may have a broken one.