After dismantling the inside cover of the boot lid I found that if you pull down on the lens, it easily "pops" of without causing any damage. To remove the lens without stripping down the inside trim is easy: simply place a flat screwdriver in the gap above the top of the lens and gently lever down.
The number plate light is usually on the same circuit as the head lights.
the fuse should be labelled tail lights.(whats the problem with no. plate lights?)
The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.
Undo the screws around the number plate, take the number plate off then put the new number plate on.
How do you change the number plate bulb on mercede E220 2001?
You can remove the panel inside the back of the car. From there you can access your tail lights and your tag lights.
Radio fuse
The owners manual indicates fuse # 12 in the Fascia fuses is for the number plate and a number of other things including Hazard lights.
try changing the bulb, you can get them from halfords
to wire the license plate lights you must have lights and wire them to the scooter.
Remove tire and inner fender well and change it from there. Other option is to remove the licence plate and reverse lights,reach through to the tail lights.
No, the license plate light is wired in with the rear tail lights, not the brake lights.