Note:The accumulator/drier should be replaced whenever the compressor is replaced Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Have the AC system discharged.Disconnect the neagtive battery cable * Clean the compressor thourghly around the refrigerant line fittings * Remove the serpentine belt * Raise and support it securely vehicle on jackstands * Disconnect the electrical connector from the AC compressor * Disconnect the suction and discharge lines from the compressor.Both lines are mounted to the back of the compressor with a plate secured by one bolt.Plug the open fittings and discard the seals between the plate and compressor * Unbolt and remove the rear compressor mount.It may be necessary to remove the right side engine mount bolt and raise the engine to access the rear compressor mount bolts * Remove the compressor to front bracket bolts and nuts and remove the compressor from the engine compartment
Auto or standard?
open the trunk and take out the screws
its either the water pump or thermostat take it to a shop if you can that pump is a nightmare to change
The oil capacitie with filter change is 4.0 to 4.5 quarts
2.2L Altenator on a 2.2L, AND, 2.4L on a 2.4L ONLY!
no i can not answer this quiestion