The bearings are inner and outer and are removed that way. The knuckle has a center ridge built in to keep the bearings from moving or touching the other after installation so the inner is removed toward the inside and the outer is removed toward the outside. In between the two bearings is a hub spacer which will be reused with the new bearings. Push the hub spacer to one side to see the inner part of each bearing and tap out of the knuckle with a drift or metal chisel being careful to only tap on the bearing you are removing. They will come out of the knuckle very easy with a few taps. To ease the reinstall of the new bearings place them in a freezer for a hour.
There are two taper roller bearings in each front hub, on a Samurai.
under the left rear fender next to the shock toward front of the bike
how do you change front wheel bearing for 420 rancher
how to change front bumper in 1996 Suzuki sidekick sport
When you change rotor or main ball joint, or when they get worn.
are you talking about the front or back? the back bearings are a non serviceable part, the in order to change the bearings u need to change the hub, the front bearings can be separated, but chances are if you have to change your hub, bearings will have to be changed also, you will damage the bearings trying to remove them and put them back in, so my answer is yes. get the parts yourself from ecstuning.com and you will save alot of money over dealer or most shops.
front hub removal dispatch
bearings or diff. gears worn out.
the front wheel bearings are a sealed unit, requiring a front hub assembly. when i bought mine it was a dealer item only
If you are sitting on your ATV it will be on the right hand side to the front of the engine,right under the plastic cover that attaches to the bottom of the tank. Its real eazy to get too.
Front or Rear? Both
screw driver