YOU NEED A SPECIAL SOCKET TO REMOVE IT And INSTALL IT WITHOUT DAMAGE.IT IS LOCATED ON THE EXAUST MANIFOLD
Remove the oxygen sensor vacuum to. Remove the oxygen sensor screws. Reverse the process to install the new oxygen sensor.
The oxygen sensor is screwed into the exhaust, behind the engine.
First, change the oxygen sensor and the air filter. Clear the codes and see if the idler air sensor code comes back.
The sensor is located in the rear exhaust manifold.
The service department will put in a new oxygen sensor, with a 25% discount on parts if you are a Chrysler employee, for $102.**. The sensor, with the discout, is @ $95.
no
In the exhaust pipe, near the engine.
Not if you do not repalce it.Not if you do not repalce it.
were is knock sensor on 3.1 cutlass supreme
In the exhaust pipe, ahead of the catalytic converter. You'll need a 7/8' box end wrench or an oxygen sensor socket to change it. To clear the codes, just disconnect and reconnect the battery.
it has 4 o2 sensors #1 cylinder is sensor 1 or bank 1 sensorType your answer here...
It's got 2- one in each of the exhaust manifolds. the oxygen sensor should be located on the drivers side in the exhast pipe next to the exhast manifold and the transmission bellhousing