To change the rear main seal on a Dodge Ram 1500 with a 5.9-liter engine, first, disconnect the battery and remove the transmission by unbolting it from the engine. After that, drain the engine oil and remove the oil pan to access the rear main seal. Carefully pry out the old seal, clean the sealing surface, and install the new seal using a seal installer or a similar tool to ensure it sits evenly. Finally, reassemble the oil pan and transmission, refill with oil, and reconnect the battery.
Remove the trasnsmission and you can then replace the seal.
Yes
Inside the rear axle.
To change the main rear oil seal on a 1998 Dodge Ram 1500, you'll need to start by lifting the vehicle and supporting it securely. Remove the driveshaft, then unbolt the transmission from the engine and lower it slightly to access the rear main seal. Carefully pry out the old seal, clean the sealing surface, and install the new seal using a seal installer or a suitable tool to ensure it fits evenly. Reassemble the transmission, driveshaft, and any other components, making sure to refill any lost fluids.
How do you fold the rear seats down in the 2008 dodge ram 1500 quad cab?
You remove the trans and flywheel. The seal then drives in from the rear.
Yes.
No.
No, different dimensions.
Need to know the year and engine size and what it is in.
i need a diagram on how rear brakes are assembled
To change the rear axle fluid you can remove the rear cover from the axle and drain it that way. If you don't want to remove the rear cover you can use a pump and a hose to drain it through the fill hole.